Chicken Coop Expansion

roof panel ordered

Framing and most of roof done

Need one more roof panel and then to move the auto door.

Then wire new frame, remove wire from old frame

Will replace current nest box 'roof' with some 19mm flooring. Will add another roosting bar above this.

The existing roosting bars will be removed, and the ramp steps trimmed a bit.

The ramp will go up against the wall where the current roosting bar is, and then a new roosting bar will be put in.

The length of the dividers will be reduced to make it easier for the chickens to get in to the farthest nesting box.

Two new brahma sized nesting boxes will be hung from the shelf (one on each side) with some brahma appropriate roosts between them.

corrugated panel width is 80cm
full width 3.8
5 panel wide x at 1.2 each side.

4x 3m panels

additional door.

Internally add two more hanging nest boxes.
reorganise roosting bars,

Fodder box on back side, garden on front. Utilise the rain runnoff

4m long
~1m deep
~1m tall

Sloped corrugated poly roofing